SICCO BOX for Prusa XL / The PRUSA XL drybox / Sonntags update

Introduction

This tutorial will guide you through the assembly and setup of the SICCO BOX for the Prusa XL 3D printer. Designed to provide a dry storage solution for filament, this box helps enhance your 3D printing experience by keeping your materials in optimal conditions.

Step 1: Unboxing and Initial Setup

• Open the package and ensure all parts are present.
• Familiarize yourself with the components:
  • Frame parts
  • Base plate
  • Side panels
  • Back panel
  • Filament spool holder
  • Silica gel container
  • Electronics box
• Prepare your workspace to ensure an organized assembly process.

Step 2: Constructing the Frame

• Begin assembling the frame:
  • Connect the frame pieces according to the provided schematic.
  • Ensure all joints are tight and secure for stability.
• Use a screwdriver to fasten screws where required, paying attention to the orientation of each part.

Step 3: Attaching the Base Plate

• Secure the base plate to the assembled frame:
  • Align the base with the frame and use screws to fix it in place.
  • Ensure the base is level to provide a stable foundation.

Step 4: Installing Side Panels

• Attach the side panels:
  • Position each panel against the frame, ensuring they fit snugly.
  • Use screws to secure each panel, checking for alignment.

Step 5: Adding the Back Panel

• Fix the back panel onto the structure:
  • Align the panel with the sides and top of the frame.
  • Secure it with screws, ensuring it is tightly fitted.

Step 6: Setting Up the Filament Spool Holder

• Install the filament spool holder:
  • Position the holder on top of the box or at the designated side.
  • Make sure it rotates freely to allow easy filament access.

Step 7: Incorporating the Silica Gel Container

• Place the silica gel container inside the box:
  • This helps absorb moisture and maintain filament quality.
  • Ensure it is easily accessible for replacement when needed.

Step 8: Configuring the Filament Guide

• Set up the filament guide:
  • Position the guide to direct filament from the spool to the printer.
  • Ensure the path is smooth to avoid any tangles or snags.

Step 9: Connecting the Electronics Box

• Connect the electronics box:
  • Secure it within the designated area of the SICCO BOX.
  • Ensure all electronic connections are properly made for functionality.

Step 10: Installing the SICCO Display

• Attach the SICCO display:
  • Position it where it is easily visible.
  • Make the necessary electrical connections for operation.

Step 11: Wiring Setup

• Complete the wiring:
  • Carefully connect all wires according to the schematic.
  • Double-check all connections for security and proper placement.

Step 12: Final Assembly of the Prusa XL

• Integrate the SICCO BOX with the Prusa XL:
  • Securely attach the box to the printer.
  • Connect the display cable as instructed in the manual.

Step 13: Connecting the PTFE Tube

• Connect the PTFE tube:
  • Ensure a tight fit between the filament spool and the printer.
  • This connection is crucial for smooth filament feeding.

Step 14: Attaching the Handle

• Install the handle:
  • Position it on the front of the box for easy access and portability.
  • Secure it with screws.

Conclusion

You have successfully assembled the SICCO BOX for your Prusa XL. This setup will help maintain the quality of your filament while making it easier to manage your 3D printing supplies. For further enhancements, consider exploring additional features or customizations available on the Printables website. Happy printing!