Verkada Access Control | Adding and Setting Up a Door in Command (Command Admin)

Introduction

This tutorial will guide you through the process of adding and setting up a door in Verkada Command. You will learn how to configure door settings, assign access levels for users, and establish door schedules to enhance your security management. This process is essential for effective access control in your facility.

Step 1: Understand Requirements for Adding a Door

Before you begin, ensure you have the following prerequisites:

• An active Verkada Command account
• Admin access to configure doors
• The door hardware that is compatible with Verkada systems
• Network connectivity for the door controller

Step 2: Add a Door

To add a new door in Command, follow these steps:

1. Log in to your Verkada Command account.
2. Navigate to the Access Control section.
3. Click on Add Door.
4. Select whether the door is a standard door or an in/out door:
   • Standard Door: Used for single entry points.
   • In/Out Door: Allows for entry and exit tracking.

Step 3: Configure Door Settings

Set up the door’s basic configuration:

1. Name: Assign a unique name for easy identification.
2. Location: Specify the physical location of the door.
3. Context Cameras: Pair any relevant cameras for monitoring.
4. Review and adjust other settings as necessary.

Step 4: Adjust Door Hardware Settings

Customize the hardware settings for the door:

1. Unlock Time: Set how long the door remains unlocked after activation.
2. DPI (Door Position Indicator): Configure to monitor door status.
3. DHO (Door Hold Open): Adjust settings for holding the door open.
4. REX (Request to Exit): Configure to allow exit without an access card.
5. DFO (Door Force Open): Set up alerts for forced entry attempts.
6. Remote Unlock: Enable this feature if remote unlocking is needed.

Step 5: Grant User Access

Assign access rights to users:

1. Go to the Users section in Command.
2. Select the user or users you wish to grant access.
3. Assign appropriate access levels that correspond to the new door.
4. Review and confirm access permissions.

Step 6: Set Door Schedules

Establish door schedules to control access times:

1. Navigate to the Schedules section.
2. Create a new schedule by specifying:
   • Days of the week
   • Start and end times for access
3. If necessary, set up schedule exceptions for holidays or special events.

Conclusion

You have now successfully added and configured a door in Verkada Command. This includes setting door parameters, granting user access, and establishing schedules. For further assistance, refer to the helpful links provided in the video description or contact Verkada support. By following these steps, you can significantly enhance your facility's access control and security management.