How To: Whirlpool/KitchenAid/Maytag Dryer Drum Belt WPY312959

Introduction

This tutorial will guide you through the process of replacing the dryer drum belt (WPY312959) in your Whirlpool, KitchenAid, or Maytag dryer. If you've noticed that your dryer drum isn't tumbling or turning, it may be time to replace the belt. This replacement is a straightforward DIY task that can save you time and money on repairs.

Step 1: Gather Your Tools

Before starting the repair, make sure you have the following tools ready:

• Phillips screwdriver
• 5/16" nutdriver

Step 2: Unplug the Dryer

Safety first! Ensure that your dryer is unplugged from the electrical outlet to prevent any accidents while you work.

Step 3: Remove the Dryer Top

• Use the Phillips screwdriver to remove any screws holding the top panel in place.
• Slide the top panel back and lift it off to gain access to the drum compartment.

Step 4: Detach the Front Panel

• Locate and remove the screws securing the front panel of the dryer.
• Carefully pull the front panel away to expose the drum and belt.

Step 5: Remove the Drum

• Gently lift the drum out of the dryer cabinet.
• Be cautious of any remaining connections or components that may need to be disconnected.

Step 6: Remove the Old Belt

• Locate the old drum belt around the drum and motor pulley.
• Carefully slide the belt off the drum and the motor pulley.

Step 7: Install the New Belt

• Take the new dryer drum belt (WPY312959) and loop it around the drum.
• Make sure to route the belt around the motor pulley as well. Ensure that it is properly aligned and fits snugly.

Step 8: Reassemble the Dryer

• Carefully place the drum back into the dryer cabinet.
• Reattach the front panel and secure it with the screws you removed earlier.
• Replace the top panel and secure it with screws.

Step 9: Test the Dryer

• Plug the dryer back into the electrical outlet.
• Turn on the dryer to check if the drum is tumbling correctly.

Conclusion

Replacing the dryer drum belt is a manageable task that can resolve issues with your dryer not tumbling. By following these steps, you should have your appliance working like new. If you run into any issues or need further assistance, consider reaching out to a professional or visiting AppliancePartsPros for more resources and advice. Happy repairing!