MSFS 24 | INI A350 | BEGINNER TUTORIAL

Introduction

In this tutorial, we'll explore how to fly the INI A350 in Microsoft Flight Simulator 2024, tailored for beginners. You’ll learn essential preparations, settings, and procedures to successfully complete your flight. Whether you're entirely new to flight simulation or just looking to improve your skills, this guide will provide you with actionable steps to enhance your flying experience.

Step 1: Preparations and Must-Haves

Before you start flying, ensure you have the following:

• Flight Simulator Software: Make sure MSFS 2024 is installed and updated.
• INI A350 Add-On: Purchase and install the INI A350 from a reliable source.
• Computer Specifications: Ensure your PC meets the recommended specifications for optimal performance.
• Controller Setup: Use a joystick or yoke for better control, and ensure it is correctly configured in the simulator settings.

Step 2: Calibration of Throttle

Proper throttle calibration is crucial for a smooth flight experience. Follow these steps:

1. Go to the simulator's control settings.
2. Locate the throttle control settings.
3. Adjust the throttle sensitivity to match your preferences.
4. Test the throttle response by moving it from idle to full power and back.
5. Make adjustments as necessary to avoid abrupt changes in engine power during flight.

Step 3: Flight Planning with SimBrief

Planning your flight route is essential for navigation. Here’s how to do it:

1. Access SimBrief: Go to the SimBrief website and create an account if you don’t have one.
2. Create a New Flight Plan:
   • Input departure and arrival airports.
   • Choose your aircraft (INI A350).
   • Set altitudes and route preferences.
3. Generate the Flight Plan: Click to generate your flight plan.
4. Export the Plan: Download the plan in the format compatible with MSFS.

Step 4: Using the Flight Management System (FMS)

Understanding the FMS is key for managing your flight:

1. Power On the Aircraft: Start the A350 and ensure the FMS is powered.
2. Input the Flight Plan:
   • Navigate to the FMS menu.
   • Enter departure and arrival airports, as well as waypoints.
3. Review and Activate the Plan: Check the entered data and activate the flight plan.

Step 5: Pushback and Engine Start

Follow these steps for a successful pushback and engine start:

1. Request Pushback: Use the ground services option in the simulator to request pushback.
2. Start the Engines:
   • Ensure the APU is running.
   • Follow the engine start procedure in the A350’s manual or FMS.

Step 6: Taxiing and Takeoff Preparation

Prepare for takeoff with these steps:

1. Taxi to the Runway:
   • Follow the taxiway instructions.
   • Use the map to navigate to the runway.
2. Runway Check: Ensure all pre-takeoff checks are completed.
3. Set Flaps: Adjust flaps according to your takeoff weight.

Step 7: Takeoff

Execute a successful takeoff by following these instructions:

1. Throttle Up: Gradually increase the throttle to full power.
2. Monitor Speed: Keep an eye on your speed indicator.
3. Rotate: At the appropriate speed, gently pull back on the control to lift off.

Step 8: Cruising and Route Changes

Once in the air, manage your flight with these tips:

1. Set Cruise Altitude: Adjust the altitude in the FMS.
2. Monitor Flight Path: Use the autopilot for navigation.
3. Make Route Adjustments: If needed, update the route via the FMS.

Step 9: Preparing for Landing

As you approach your destination, start preparing for landing:

1. Check Weather Conditions: Ensure you are aware of the landing weather.
2. Adjust Flaps: Set flaps for landing as per the aircraft manual.
3. Communicate with ATC: Follow instructions for landing clearance.

Conclusion

This beginner tutorial covered the essential steps for flying the INI A350 in MSFS 2024. From preparation and throttle calibration to flight planning and landing, each step builds your skills and confidence. To further improve your flying, consider practicing different flight scenarios or exploring more advanced tutorials. Happy flying!