HPE Aruba Old Central Setup with WayFi Wireless | Enable Passpoint for Carrier Offload

Introduction

This tutorial provides a comprehensive guide on configuring HPE Aruba access points to support carrier offload using RADIUS and Passpoint (Hotspot 2.0) with WayFi Wireless. By following these steps, you will enable seamless OpenRoaming integration and monetization for your Aruba network.

Step 1: Set Up Your HPE Aruba Access Points

• Begin by powering on your HPE Aruba access points.
• Connect to the Aruba management interface through a web browser.
• Log in with your admin credentials.
• Navigate to the Network Settings section.

Step 2: Configure RADIUS Server Settings

• In the management interface, go to Security > RADIUS.
• Add a new RADIUS server with the following details:
  • Server IP Address: Enter the IP address of your RADIUS server.
  • Port: Typically, use port 1812.
  • Shared Secret: Set a secure shared secret that matches the configuration on your RADIUS server.
• Click Save to apply the settings.

Step 3: Enable Passpoint (Hotspot 2.0)

• Navigate to the Wireless Settings section in the management interface.
• Look for the Passpoint or Hotspot 2.0 option.
• Enable Passpoint support by toggling the appropriate setting.
• Configure the following:
  • Provider Name: Set your network's provider name.
  • Operator Friendly Name: Enter a user-friendly name for your network.
  • Service Provider: Specify the service provider details according to your setup.
• Save your changes.

Step 4: Configure SSID for OpenRoaming

• Return to Wireless Settings and create a new SSID (Service Set Identifier).
• Set the SSID name that will be used for OpenRoaming.
• Under the SSID settings, enable the following:
  • Passpoint: Check this option to allow devices to connect using Passpoint.
  • OpenRoaming: Ensure this feature is enabled.
• Save your SSID configuration.

Step 5: Test Your Configuration

• Connect a compatible device to the SSID you just created.
• Verify that the device can connect seamlessly using Passpoint.
• Check the connection details to ensure that it is authenticated through the RADIUS server.

Step 6: Monitor and Optimize

• Use the WayFi Wireless portal to monitor network performance and user connections.
• Analyze usage statistics and adjust configurations as necessary for optimal performance.
• Consider implementing analytics to track user engagement and monetization opportunities.

Conclusion

You have successfully configured your HPE Aruba access points to support carrier offload using RADIUS and Passpoint. This setup allows for seamless connectivity and monetization through OpenRoaming. For further enhancements, explore analytics and user engagement strategies to maximize the benefits of your network. If you need assistance, refer to the additional resources linked in the introduction.