20' Pinnacle Series Hexagon High Peak Frame Tent Installation Procedure

Introduction

This tutorial provides a step-by-step guide for installing the 20’ Pinnacle Series Hexagon High Peak Frame Tent from Celina Tent. This unique hexagon-shaped tent is designed to maximize usable space and create a central gathering feel, making it ideal for events. With a straightforward design that requires only two people for setup, this guide will help you navigate the installation process smoothly.

Step 1: Gather Necessary Equipment

Before starting the installation, ensure you have all the required materials:

• 20’ Pinnacle Series Hexagon High Peak Frame Tent
• Tent stakes and ropes
• Ground tarps (optional for floor protection)
• A ladder (for higher sections)
• A mallet (for driving stakes into the ground)

Step 2: Choose the Installation Site

Select a suitable location for your tent:

• Ensure the ground is level and free of debris.
• Check for overhanging branches or obstacles that may interfere with the tent’s height.
• Measure the area to ensure it can accommodate the 20’ hexagon shape.

Step 3: Lay Out the Tent Components

Unpack the tent and lay out all components:

• Identify the high peak tubing and cross cables.
• Arrange the parts in a way that makes it easier to access them during assembly.

Step 4: Assemble the Frame

Begin assembling the tent frame:

1. Connect the high peak tubing:

   • Start connecting the main frame pieces using the provided connectors.
   • Ensure all joints are secure and properly aligned.

2. Attach cross cables:

   • Install the cross cables which support the high peak structure.
   • These cables are crucial for maintaining the tent's stability and shape.

Step 5: Raise the Tent

With the frame assembled, it’s time to raise the tent:

• Position the frame:

  • Carefully lift the assembled frame into an upright position.
  • Have one person on each side for balance and support.

• Secure the tent:

  • Use the mallet to drive stakes into the ground at designated points.
  • Attach ropes to the stakes for added security against wind.

Step 6: Adjust and Verify Stability

Once the tent is raised, check for stability:

• Make adjustments to the tension of the cross cables if necessary.
• Ensure the tent is evenly tensioned to prevent sagging.

Step 7: Final Touches

Add any additional features to enhance your tent setup:

• Install sidewalls if needed for weather protection.
• Arrange furniture or equipment inside the tent as per your event requirements.

Conclusion

Installing the 20’ Pinnacle Series Hexagon High Peak Frame Tent is a straightforward process that can be efficiently done by two people. By following these steps, you can ensure a secure and stable tent setup for your event. After installation, enjoy the increased space and comfort that this unique tent design provides. For further information or to purchase, visit the provided websites.