Fantasea Hybrid Vacuum Safety System Tutorial

Introduction

The Fantasea Hybrid Vacuum Safety System enhances your underwater experience by ensuring that your camera housing is watertight before and during your dive. This tutorial will guide you through the essential steps to effectively use this safety system, ensuring your equipment is secure and you can focus on capturing stunning underwater shots.

Step 1: Preparing for the Vacuum Test

1. Gather Your Equipment

   • Ensure the Fantasea Hybrid Vacuum Safety System is available.
   • Have your camera housing ready and dry.

2. Inspect the Housing

   • Check for any visible damage or dirt.
   • Ensure that all O-rings are properly seated and lubricated.

3. Connect the Vacuum Pump

   • Attach the vacuum pump to the designated port on the housing.
   • Make sure the connection is secure to prevent air leaks.

Step 2: Performing the Vacuum Test

1. Activate the Vacuum System

   • Use the vacuum pump to remove air from the housing.
   • Watch the gauge on the pump; it should indicate a decrease in pressure.

2. Check for Stability

   • Observe the gauge for a stable reading.
   • A stable pressure indicates that the housing is sealed properly.

3. Monitor the Vacuum Duration

   • Maintain the vacuum for at least 5 minutes.
   • If the pressure drops significantly, recheck the seals and fittings.

Step 3: Utilizing the Moisture Detector

1. Install the Moisture Detector

   • Ensure the moisture detector is correctly placed inside the housing before sealing it.
   • The detector will alert you to any moisture that may enter during the dive.

2. Check Detector Functionality

   • Test the moisture detector to ensure it is operational.
   • Familiarize yourself with the indicator lights or sounds that signal moisture presence.

Step 4: Conducting the Dive

1. Final Equipment Check

   • Before entering the water, ensure the vacuum is still stable and the moisture detector is in place.

2. Monitor During the Dive

   • Keep an eye on the moisture detector throughout your dive.
   • If the detector indicates moisture, exit the water immediately to assess the housing.

Conclusion

By following these steps, you can confidently use the Fantasea Hybrid Vacuum Safety System to ensure your camera housing remains watertight, allowing you to focus on your underwater photography and videography. For a detailed manual, you can download it from the Fantasea website. Happy diving and shooting!